DIN rail case 6 modules
This DIN rail case is the ideal solution to enclose your Archiduino when you’re ready to put it in your final installation. It’s made with robust ABS and fits perfectly with Archiduino, even if a LCD board is mounted on it. It has been expressly designed to hook on a standard DIN 50022 top hat rail in order to allow the installer not to modify the switchgear rack.
The standard DIN rail
Let’s look at some description (kindly offered by Wikipedia):
A DIN rail is a metal rail of a standard type widely used for mounting circuit breakers and industrial control equipment inside equipment racks. These products are typically made from cold rolled carbon steel sheet with a zinc-plated or chromated bright surface finish. The term derives from the original specifications published by Deutsches Institut für Normung (DIN) in Germany, which have since been adopted as European (EN) and international (IEC) standards.
The original page is here.
|Case||ABS box (width 6 DIN)|
|Dimensions LxHxP||106 x 96 x 63 mm.|
|Mounting type||Standard DIN 50022 rail|
The Archiduino DIN RAIL case, as well as the whole Archiduino parts set, has been certified in authorized laboratory to meet the following IEC/CEI specifications:
|Electrostatic discharge immunity test||CEI EN 61000-4-2||Enclosure||ESD|
|Radiated, radio-frequency, electromagnetic field immunity test – Constant power calibration method (80-1000 MHz)||CEI EN 61000-4-3||Enclosure and harnesses||RI|
|Measurement of radiated disturbance||CEI EN 55022||Enclosure and harnesses||RE|